EMC Testing on Household Appliances

Benefits of EMC Testing on Household Appliances In 2020

Owing to the impact of various components we use on the environment, it is only logical that the authorities have come up with a set of standards that govern the production of various devices.

One of the most common standards that product designers view as a challenge today is making sure that electromagnetic interference is controlled. This is done through extensive Electromagnetic compatibility testing and design.

EMC testing is done by looking at both the emission and susceptibility issues by buffering the sources of interferences and protecting the potential aspects that can be affected by these waves.

Products need to be in compliance with these EMC standards.

Why Perform Pre Compliance EMC Testing?

The cost of performing these tests is high and can lead to longer project cycles and increased budgets. The burdens increase further if you perform tests in the later stages of product development.

Around 50% of all products fail EMC testing in the initial round, and it is better if a product fails at this stage as opposed to failing during the final round.

All items that can potentially radiate emissions or conduct emissions across the board should be tested. The testing process is split into two stages which are the emissions and immunity testing.

How to Avoid EMC Failure?

One of the proven ways to avoid cases of your products failing EMC tests is by conducting pre-compliance tests. You can do this through a couple of methods integrated into your product development cycles.

Doing this makes sure that your product is compliant before you even seek official approval.

You can borrow some of the metrics used for EMC testing and conduct the tests yourself, albeit with a slightly higher margin, to ensure that your products are safe.

What Happens if You Fail?

Several aspects come into the fray during product development as engineers focus on performance, reliability, form, and aesthetics among others.

Compliance is often overlooked and this is crucial as this is what determines whether the product will make it to the market or not.

While compliance can be seen to be an aspect that does not have any direct financial implication on the product compared to the others, failing the tests can lead to far more severe consequences.

If you overlook compliance, the time will come when you want to launch your device, and compliance was not factored into the manufacturing process.

You will then need to get the equipment to a certified and reliable testing lab to make sure that it meets the required limits. If you do leave compliance to the later stages of development, you will run into a couple of complications.

At this stage, you can easily fail the test, and this will lead to additional test time and costs incurred plus delayed product schedules.

If you cannot fix the product to make it compliant, you will be forced to go back to the drawing board and come up with a better design. This is bad for business as it means that all the efforts you have put in went to waste.

No matter how hard you try, it is impossible to foresee all expected situations. This is why you need to ensure that you go through all the pre-compliance steps and avoid the costly consequences.

If you fail, your non-compliant products will be barred from getting into certain markets. This will hurt your business reputation as people will no longer want your products.

Your business will also be slapped with sanctions and fines by the professional bodies since you have not adhered to the standards.

Due to this reason, it is vital to make sure that all your devices are EMC compliant, as the authorities are relentless on this.

If you would like these questions answered, or would like to know more about the EMC standards and product testing or need EMC testing done, then look no further than Compliance Engineering.

We are the definitive source for all of your Electromagnetic Compatibility (EMC) requirements. Please call us today on + 61 3 9763 3079 or contact us here.

EMC Testing Automotive Components

Importance Of Electrical And EMC Testing For Automotive Components

Are you involved in manufacturing automotive components? Do you know the importance of electrical and EMC testing for automotive components?

If you manufacture any automotive component that contains electronic circuitry inside, most probably, the component will emit electromagnetic waves when it’s in operation.

These waves are quite similar to radio, TV, and microwaves. Most of the time, these emissions are strong enough to affect the operation of other electronic equipment in the vicinity.

That’s why Electromagnetic Compatibility (EMC) Testing is mandatory for such components to make sure the emissions from such components fall within the electromagnetic spectrum.

This article provides information on the importance of electrical and EMC testing for automotive components.

  • What Is EMC Testing?
  • Why Care About EMC Testing?
  • What Is Pre-Compliance Testing?
  • How To Find The Best EMC Testing Service For Automotive Components?

What Is EMC Testing?

All electrical and electronic devices including automotive components have the potential to transmit electromagnetic fields.

There is a huge risk of these devices interfering with each other due to the proliferation of electronic devices in everyday life.

There have been many cases where automotive components have been recalled or withdrawn from the market due to the high level of electromagnetic interference.

That’s where Electromagnetic Compatibility (EMC) Testing becomes important. The Australian Government has adopted stringent laws to prevent the occurrence of EMC problems.

International standards relating to EMC testing have been set for all countries to observe for all electronic components released to the market. EMC testing is mandatory for all electronic components manufactured in Australia.

Why Care About EMC Testing?

Whether you are a manufacturer of automotive electronic components or any other electronic products, you cannot release these products to the market without a certification saying it has passed EMC testing services.

This testing is mandatory for all electronic components manufactured in Australia, imported to the country or exported from Australia.

The certificate should state that the electromagnetic emissions are within the range allowed for the operation of other similar products.

That’s why you need to find a reliable EMC testing service in Australia to test your electronic products.

What Is Pre-Compliance Testing?

Pre-compliance testing is important to reduce the costs of redesigning products due to the failure of EMC testing. Pre-compliance testing is conducted during the product development stage.

You can change anything in the product that doesn’t comply with EMC rules and regulations by pre-testing the product.

That’s why you need to make use of pre-compliance EMC testing for all your automotive electronic components.

The most common pre-testing is emission testing. It’s crucial for the final EMC test for certification. This test is usually done in the plant or the manufacturer’s location.

This test will measure the product emissions and help adjust it to meet the required standards.

The most important benefit of pre-compliance testing is the ability to have a less problematic EMC testing process at the final stage of product development.

This will prevent huge losses to your company due to product return, product re-design, and repeat tests.

How To Find The Best EMC Testing Service For Automotive Components?

Are you searching for the best EMC testing service for automotive components? Australia has its own share of EMC testing services. Your research plays an important part when choosing the best EMC testing company in the country.

If you would like these questions answered, or would like to know more about the EMC standards and product testing or need EMC testing done, then look no further than Compliance Engineering.

We are the definitive source for all of your Electromagnetic Compatibility (EMC) requirements. Please call us today on + 61 3 9763 3079 or contact us here.

Why Is EMC Testing Necessary?

Why Is EMC Testing Necessary?

Are you involved in the manufacture or importation of any products that contain electronic components?

If so, it is important to note that you are required to subject these products to EMC testing for purposes of compliance or due diligence or both.

What is EMC testing supposed to achieve? This is the main question that comes to mind after you find out that it is necessary. This testing helps provide product assurance in two ways:

  • For starters, this testing will help guarantee that your product will be able to function as intended when exposed to electromagnetic disturbances that normally characterise the operating environment it is designed for.
  • Secondly, EMC testing is also meant to guarantee that the product will be able to operate efficiently without producing electromagnetic interference that is beyond the acceptable levels for that type of device. This is meant to assure users that the device’s operation will not interfere with the operation of other devices within the same operating environment.

Now that you know what EMC testing focuses on, read on to find out more about the main reasons why it is necessary.

Safeguarding Electromagnetic Spectrum

Over the years, the number of electronic devices that emit electromagnetic waves as electric energy flows through their circuitry has been on a sharp increase.

Combine that with a limited magnetic spectrum which is also required for important applications involving the use of microwave signals, radio waves and x-ray machines among others has created the need to limit unnecessary use of this limited resource.

Simply put, to ensure that important operations requiring the use of the limited electromagnetic spectrum continue uninterrupted, all electronic devices must be tested to ensure that they only occupy as much of this limited resource as necessary, if any.

Product Quality

As previously mentioned, EMC testing is meant to guarantee that the products in question deliver the intended level of performance without being affected by interference from other electronic devices and components encountered in its normal working environment.

In case a product’s performance is found to be affected by the electromagnetic interference produced by other electronic devices within its working environment, then you as the manufacturer or importer cannot provide assurance of its quality to the intended end-users in its current state.

Safety

To follow up on the above point, EMC testing is also essential for safety purposes. The failure of some electrical components and devices can expose workers and the public to serious safety risks.

EMC testing helps prevent such problems by ensuring that the electromagnetic interference produced or absorbed by the product under consideration does not present a risk of failure of the device or other devices in its intended area of operation.

Compliance

Due to the importance of maintaining the integrity of the finite electromagnetic spectrum as well as ensuring product quality and safety during use, the government has put in place various EMC regulations that must be satisfied by all manufacturers and importers of products containing electronic components.

EMC testing can be used to establish whether your product complies with these safety and quality guidelines.

Failure to comply with the necessary EMC guidelines, as set out by the relevant government authorities, before introducing your product into the market can lead to serious legal issues.

Conclusion

All electronic components produce electromagnetic interference when current flows through their circuits. This interference can affect the proper operation of other electronic devices within your device’s area of operation.

Alternatively, your device may also be affected by electromagnetic interference from other devices already in use. To guarantee electronic product operation, safety and compliance with the law, EMC testing is necessary.

If you would like these questions answered, or would like to know more about the EMC standards and product testing or need EMC testing done, then look no further than Compliance Engineering.

We are the definitive source for all of your Electromagnetic Compatibility (EMC) requirements. Please call us today on + 61 3 9763 3079 or contact us here.

EMC Testing And Certification

All About EMC Testing & Certification – Electrical Product Testing

Have you built an electronic device that meets market demands? Are you confident the device radiates very little energy and doesn’t interfere with other electronic devices? If you’re not sure of the answers to these questions, please read below for more.

The only way of knowing that your electronic device doesn’t interfere with other electronic devices is to conduct an EMC test on your electronic devices.

Many manufacturers are confident that their electronic devices are not susceptible to outside electromagnetic interferences however, most of these products fail when they reach the final EMC testing stage.

This is a nightmare for most product designers and manufacturers. That’s why pre-compliance EMC testing is encouraged amongst the manufacturers and product designers.

This article provides information on EMC Testing & Certification for electronic products.

  • Early error detection can speed up the electronic project lifecycle
  • Reducing the risk of failing certification
  • EMC testing reduces over-engineering
  • Finding the best EMC testing lab in Australia

Early Error Detection Can Speed Up The Electronic Project Lifecycle

When product deficiencies are identified early in the development process, it is easier to rectify their shortcomings. Trying to fix the shortcomings after EMC testing is expensive and time-consuming.

Pre-compliance EMC testing will let the manufacturer or designer of the electrical product focus on the areas that they have recognised as the potential reasons for concern and find the right solution to them.

The risk of design failure is relative to how long the manufacturer delays EMC testing. If you leave EMC testing to the end of the project, you will be completely reliant on the design team’s skills and competence.

This isn’t the best thing to do if you want the best final product. EMC testing and certification can help save a lot of time and money in the product development process.

Reducing The Risk Of Failing Certification

Early EMC testing can reduce the risk of failing certification. You can determine the non-compliance issues before submitting the final product for formal testing with pre-compliance EMC testing.

Pre-compliance testing will make EMC practice a less stressful experience to the manufacturer and product designers.

That’s why you should consider pre-compliance EMC testing and certification for all your electrical products.

EMC Testing Reduces Over-Engineering

Early EMC testing and certification will help reduce over-engineering and save money for the manufacturers and designers. Before the electrical product is tested, it is not known where the problems may occur.

The production team might add more countermeasures where it’s not required. More money would be unnecessarily wasted on product development areas due to overengineering.

That’s why you should conduct a pre-compliance EMC testing for all your electrical products.

Finding The Best EMC Testing Lab In Australia

Choosing the best 3rd party EMC test lab in Australia isn’t an easy task. There are many factors to look into when choosing a reputable test lab in Australia.

Your research plays an important part in this regard. It’s worth keeping the following criteria in mind when choosing the best EMC test lab in Australia:

  • Can the chosen lab do all the testing you need?
  • Will you need to find another lab to do part of the testing?
  • How close is the lab to your manufacturing facility?
  • Is the EMC testing lab accredited?
  • Do they offer free design support if your product fails the test?
  • What is the lead time of the lab – the time between booking the test and getting a test slot?

If you would like these questions answered, or would like to know more about the EMC standards and product testing or need EMC testing done, then look no further than Compliance Engineering.

We are the definitive source for all of your Electromagnetic Compatibility (EMC) requirements. Please call us today on + 61 3 9763 3079 or contact us here.