Vibration Testing Services for Australia

Compliance Engineerings accredited vibration testing facilities cater for a wide range of international standards for its customers within Australia. Electrodynamic shakers are utilised to simulate momentary shocks and long term shaking of components or assemblies, which is useful in determining the physical durability of a device and its expected life cycle.

vibration testing compliance engineering

Vibration testing compliance engineering

Categories of Vibration Testing

Compliance Engineerings accredited vibration and shock testing services replicate some of the harsh environmental conditions that a product will encounter throughout its lifespan.
In Australia, these types of tests are normally performed in three axes in turn. Vibration phenomena can be applied at individual frequencies with ascending amplitude, or swept over a defined frequency range to identify weaknesses or resonant frequencies.
Vibration Testing Profiles: swept sine, random, sine on random, resonance search, fixed frequency
Shock Testing Profiles: half-sine, saw tooth, triangular, rectangular, trapezoidal

Compliance Engineerings shock and vibration testing facilities cater to a wide range of international standards for customers within Australia.

Electrodynamic Shaker Capabilities

  • Sine: 1,000 kgf (peak)
  • Random: 1,000 kgf (rms)
  • Shock: 2,000 kgf (peak)
  • Frequency range: 3 Hz to 2800 kHz
  • Maximum Velocity: 1700 mm/s
  • Maximum Acceleration: 100 G (half sine) with a bare armature
  • Maximum payload: 300 kg
  • Maximum displacement: Shock: 50 mm (p-p), Continuous: 40 mm (p-p)

Accredited Vibration Testing Facilities in Australia

Compliance Engineering hold ISO 17025 accreditation for their shock and vibration test facilities. Some of the vibration standards that Compliance Engineering can perform testing to include:

  • IEC 61373 - Railway
  • RTCA DO-160F
  • MIL STD 810
  • IEC 61373
  • IEC/EN/AS 60068.2.6
  • IEC/EN/AS 60068.2.27

Accredited EMC Testing

compliance engineering vibration test

Electrodynamic Shaker Mounting Fixture

To ensure that dynamic forces are applied to components in a way which is representative of their in-service conditions, a dedicated fixture may be required. Compliance Engineering has engineering expertise to fabricate mounting fixtures for companies in Australia using their shock and vibration test facilities.

For more information on Compliance Engineering’s vibration testing services in Australia, please don’t hesitate to contact us on (03) 9763 3079. We also provide a range of other compliance services including RCM testing, RF enclosure manufacture, radiation hazard measurement, interference investigation, environmental testing and CE testing.