Accreditation Certificate
To demonstrate our commitment to quality and technical competence, Compliance Engineering pursued and obtained accreditation from the American Association for Laboratory Accreditation (A2LA), which is one of the world’s most highly respected accreditation organisations.

A2LA is a signatory to several bilateral and multilateral mutual recognition arrangements (MRA’s) including the International Laboratory Accreditation Cooperation (ILAC), the Asia Pacific Laboratory Accreditation Cooperation (APLAC), and the InterAmerican Accreditation Cooperation (IAAC). These agreements facilitate the acceptance of test reports between A2LA-accredited laboratories and 46 economies around the globe. In addition, A2LA has recognition from over 30 federal, state and local government agencies, companies and associations.

A2LA and NATA (National Association of Testing Authorities) are both signatories to the ILAC MRA and acceptance testing and calibration results from each organisation are mutually recognised.

Compliance Engineerings Certificate Number: 2829.01

http://www.a2la.org/scopepdf/2829-01.pdf

Compliance Engineering are accredited to perform the following tests on military, automotive sub-components, information technology equipment (ITE), medical electrical equipment, electric motors, various electronic and electrical components/systems:

In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on automotive sub-components, information technology equipment (ITE), medical electrical equipment, electric motors, and various electronic and electrical components/systems:

Test Technology:Test Method(s):
Automotive EMC
RF Emissions
(Radiated and Conducted)
CISPR 25 (2008); CISPR 25; EN 55025 (2008); EN 55025; AS/NZS CISPR 25 (2004); AS/NZS CISPR 25
Electrostatic Discharge (ESD) ImmunityISO 10605 (2008); ISO 10605
Absorber Lined Shielded Enclosure
(ALSE) RF Immunity
ISO 11452-2 (2004); ISO 11452-2
TEM Cell RF ImmunityISO 11452-3 (2001); ISO 11452-3
Bulk Current Injection RF ImmunityISO 11452-4 (2005); ISO 11452-4
Stripline RF ImmunityISO 11452-5 (2002); ISO 11452-5
Automotive Transient ImmunityISO 7637-2 (2004); ISO 7637-2; ISO 7637-3 (2007) (CCC only); ISO 7637-3 (CCC only)
Electrical LoadISO 16750-2
Harmonic Current EmissionsAS/NZS 61000-3-2; IEC 61000-3-2; EN 61000-3-2
Voltage Fluctuation &
Flicker Emissions
AS/NZS 61000-3-3; IEC 61000-3-3; EN 61000-3-3
Immunity
Electrostatic Discharge (ESD) ImmunityEN 61000-4-2 (2009); EN 61000-4-2; IEC 61000-4-2 (2008); IEC 6100-4-2; AS/NZS 61000.4.2 (2002); AS/NZS 61000.4.2
Radiated RF ImmunityEN 61000-4-3 (2008); EN 61000-4-3; IEC 61000-4-3 (2008); IEC 61000-4-3; AS/NZS 61000.4.3 (2006); AS/NZS 61000.4.3
Electric Fast Transient Burst ImmunityEN 61000-4-4 (2005); EN 61000-4-4; IEC 61000-4-4 (2004); IEC 61000-4-4; AS/NZS 61000.4.4 (2006); AS/NZS 61000.4.4
Surge ImmunityEN 61000-4-5 (2006) (excluding clause 6.2); EN 61000-4-5 (excluding clause 6.2); IEC 61000-4-5 (2005) (excluding clause 6.2)
Conducted RF ImmunityEN 61000-4-6 (2007); EN 61000-4-6; IEC 61000-4-6 (2008); IEC 61000-4-6; AS/NZS 61000.4.6 (2006); AS/NZS 61000.4.6
Power Frequency Magnetic
Field Immunity
EN 61000-4-8 (1994); EN 61000-4-8; IEC 61000-4-8 (2001); IEC 61000-4-8; AS/NZS 61000.4.8 (2002); AS/NZS 61000.4.8
Pulse Magnetic Field ImmunityEN 61000-4-9 (1993); EN 61000-4-9; IEC 61000-4-9 (2001); IEC 61000-4-9
Voltage Dips and Interrupt ImmunityEN 61000-4-11 (2004); EN 61000-4-11; IEC 61000-4-11 (2004); IEC 61000-4-11; AS/NZS 61000.4.11 (2004); AS/NZS 61000.4.11
Harmonic and Interharmonic ImmunityIEC 61000-4-13 (2002); IEC 61000-4-13; EN 61000.4.13 (2009); EN 61000-4-13; AS/NZS 61000.4.13 (2006); AS/NZS 61000.4.13
DC Dips & InterruptsAS/NZS/EN/ IEC 61000-4-29
Military EMC MIL-STD-461D/ MIL-STD-462D, (CE101, CE102, RE101, RE102, CS101, CS114, CS115, CS116, RS101, RS103);
MIL-STD-461E, (CE101, CE102, RE101, RE102, CS101, CS114, CS115, CS116, RS101, RS103);
MIL-STD-461F, (CE101, CE102, RE101, RE102, CS101, CS106, CS114, CS115, CS116, RS101, RS103)
MIL-STD-461G,(CE101, CE102, RE101, RE102, CS101, CS114, CS115, CS116, CS118, RS101, RS103)
Aircraft RTCA DO-160F:
Section 4: Temperature & Altitude (excluding section 4.6)
Section 5: Temperature Variation Testing
Section 6: Humidity Testing
Section 8: Vibration Testing
Section 15: Magnetic Effect Testing
Section 16: Power Input Testing
Section 18: Audio Frequency Conducted Susceptibility (Power Input Testing)
Section 20: Radio Frequency Susceptibility (Radiated and Conducted)
Section 21: Emission of Radio Frequency Energy
Section 24: Icing Testing (Category A only)
Section 25: Electrostatic Discharge Immunity
Section 26: Fire, Flammability
RF Shielding PerformanceMIL-STD-285; IEEE 2992
RADHAZ (Radiation Hazard)AS 2772 2; ARPANSA RHS 30; IEC 62233
Electronic Switches EN 60669-2-1 (Section 26, excluding CISPR 14 & CISPR 15 Emissions);
IEC 60669-2-1 (Section 26, excluding CISPR 14 & CISPR 15 Emissions)
Gaming Machine National Standard (GMNS)AS/NZS GMNS Version 10.3 (Sections 2.3.51 to 2.3.59, 2.4.27, & 2.4.30a to 2.4.30d)
Generic ImmunityEN 61000-6-1; IEC 61000-6-1; AS/NZS 61000-6-1;
EN 61000-6-2; IEC 61000-6-2; AS/NZS 61000-6-2
Household EMC
Household Safety
AS/NZS CSIPR 14-2; CISPR 14-2;IEC 60335-1;
AS/NZS 60335-1 (Sections 14, 15, & 19.11.4); IEC 61000-4-5 (up to ± 4 KV only)
Information TechnologyAS/NZS CISPR 24; CISPR 24
LaboratoryEN 61326-1 (excluding EN 55011 Emissions)
LightingEN 61547
MaritimeEN 60945 (Sections 5.2.2, 7, 8, & 10)
MedicalEN 60601-1-2 (excluding CISPR 11, CISPR 14-1, & CISPR 15 Emissions)
Alarm SystemsEN 50130-4 (excluding EN 61000-4-20)
Overhead AC Powerlines & HV InstallationsAS 2344
Radio Spectrum Matters (ERM) ETSI EN 301 489-1 (excluding sections 8.2, 8.3, 8.4, & 8.7);
ETSI EN 300 328; AS/NZS 4268
Railway EN 50121-3-1;
EN 50121-3-2 (Immunity Requirements only);
IEC 50155 (excluding sections 5.1.1.3, 5.1.1.4, 5.1.2, 5.1.3, 5.1.4, 12.2.8.2, 12.2.9, & 12.2.10);
EN 50155 (excluding sections 5.1.1.3, 5.1.1.4, 5.1.2, 5.1.3, 5.1.4, 12.2.8.2, 12.2.9, & 12.2.10)
Traffic Signals AS/NZS 2144 (excluding AS 60068.2.5, and sections 5.1, 5.2, & 5.5.7.2);
EN 50293 (excluding EN 55022 and EN 55014 Emissions)
Environmental Climatic
Temperature/Humidity IEC 60068-2-1 (2007); IEC 60068-2-1; AS 60068.2.1 (2003); AS 60068-2-1; EN 60068-2-1 (2007); EN 60068-2-1;
IEC 60068-2-2 (2007); IEC 60068-2-2; EN 60068-2-2 (2007); EN 60068-2-2; AS 60068.2.2 (2003); AS 60068.2.2;
IEC 60068-2-14 (2009) – Part N;
IEC 60068-2-14 – Part N; EN 60068-2-14 (2009) – Part N; EN 60068-2-14 – Part N; AS 60068-2-14 (2003) – Part N; AS 60068-2-14 – Part N;
IEC 60068-2-30 (2005); IEC 60068-2-30; EN 60068-2-30 (2005); EN 60068-2-30; AS 60068.2.30 (2003); AS 60068-2.30;
MIL-STD-810G – methods 501.5, 502.5, 503.5, & 507.5;
RTCA DO-160G –
Section 4: Temperature & Altitude (excluding section 4.6)
Section 5: Temperature Variation Testing
Section 6: Humidity Testing
ISO 16750-4 (excluding ice water shock test and gas corrosion test)
Vibration / Shock
1,000 kgf Sine (PK)
1,000 kgf Random (RMS)
2,000 kgf Shock (PK)
(5 to 2,800) Hz
(1 to 2,800) Hz in Manual Mode
Max. Velocity 1.7 m/sec
Max. Acceleration up to 90 g (bare table)
Max Rated Displacement: 51mm P-P standard
IEC 61373; EN 61373;
IEC 60068-2-6; EN 60068-2-6; AS 60068-2-6;
IEC 60068-2-27; EN 60068-2-27; AS 60068-2-27;
MIL-STD-810G;
RTCA DO-160G;
ISO 16750-3 (vibration only)
Ingress ProtectionAS 60529; IEC 60529; EN 60529; MIL-STD-810G – Method 5010.5; NEMA 250; ISO 20653
UVEN ISO 4892-1:2016; EN ISO 4892-3:2016
FlammabilityAS/NZS 60695.2.10:2001; AS/NZS 60695.2.11:2001; RTCA DO-160G – Section 26: Fire, Flammability
SaltMIL-STD 810G – Method 509.5 – Salt Fog; AS 60068.2.11:2003; AS 60068.2.52:2003; RTCA DO-160G – Section 14: Salt Fog
ImpactAS 60068.2.75

1) When the date, revision or edition of a test method standard is not identified on the scope of accreditation, the laboratory is expected to be using the current version within one year of the date of publication, per part C., Section 1 of A2LA R101 – General Requirements- Accreditation of ISO-IEC 17025 Laboratories.

2) This laboratory meets A2LA R104 – General Requirements: Accreditation of Field Testing and Field Calibration Laboratories for these tests.

About A2LA

The American Association for Laboratory Accreditation (A2LA) is a nonprofit, non-governmental, public service, membership society. A2LA provides comprehensive services in laboratory accreditation and laboratory-related training. Services are available to any type of organization, be it private or government. Laboratory accreditation is based on internationally accepted criteria for competence (ISO/IEC 17025:2005). A2LA also offers programs for accreditation of inspection bodies, proficiency testing providers, reference material producers and product certification bodies.

Visit the A2LA website: http://www.a2la.org/