Anechoic RF Shielded Enclosure
Our EMC compliance testing facilities include a CISPR 25 compliant fully anechoic RF shielded enclosure. This Anechoic RF shielded
enclosure can be used for both radiated RF emission & radiated RF immunity measurements. The performance of this Anechoic RF shielded
enclosure for radiated measurements in accordance with CISPR 22 has been assessed by comparison against an Open Area Test Site, with
excellent correlation observed. The benefits of using an Anechoic RF shielded enclosure over an Open Area Test Site are: Reduced test time,
Reduced travel time (no travel to remote sites) and no RF ambient emissions interfering with your results.
Semi-Anechoic RF Shielded Enclosure
A semi-anechoic RF shielded enclosure is utilised for measurements of radiated RF power in accordance with CISPR 14.
This enclosure also houses a custom manufactured stripline for measurements of radiated RF immunity in accordance with ISO 11452-5
Transient & ESD RF Shielded Enclosure
An RF shielded enclosure has been configured specifically for measurements of immunity to: Conducted RF, Transients,
Surges & ESD in accordance with commercial and automotive standards. This enclosure is also linked via a penetration to
the fully anechoic enclosure and can also be utilised as a control room for monitoring and exercise equipment.
EMC Test Configuration
The EMC testing facilities have been configured to allow for maximum measurement flexibility with all RF shielded enclosures
permanently connected via coaxial cable to a control centre, where software control of EMC instrumentation is performed.
As all EMC measurements are performed inside RF shielded enclosures, RF emissions measurements can be performed without
interference from EMC measurements being performed in an adjacent RF shielded enclosure.
EMC Test Instrumentation
A broad range of EMC test instrumentation is on hand to cater for the majority of EMC standards. Capabilities include (but
are not limited to) measurements of: Radiated RF emissions, Conducted RF emissions, Transient emissions, Transient and
Surge immunity, Magnetic field immunity, ESD immunity.
Support facilities
Compliance Engineering has facilities to cater for investigation of and modification to client equipment in order to achieve
compliance with their applicable EMC standards. These facilities include: A wide range of suppression and electronic components,
Soldering stations and hand tools. A workshop area including Pedestal drills, Milling machine and Lathe are also utilised for specialised fixtures.