SAT Absorber - Single Layer Foam RF Absorber

SAT single layer foam RF absorber can be used to lower the Q of cavities in RF amplifiers, oscillators, microwave devices; attenuate surface currents on radiating objects and absorb stray RF energy; and isolate components and plug areas of RF leakage.

• Basic composition: Carbon loaded, polyurethane, single layer sheet absorber
• Features: Variable thickness, lightweight, flexible, easily cut, high loss
• Fire Retardancy: NRL report 8093 I, II, and III
• Working temperature: -50°C (-85°F) to +80°C (+176°F)
• Thickness: Standard thicknesses are 3 mm 6 mm and 9 mm.
• Base size: Standard base size is 500 mm x 500 mm
• Color: Light blue for the surface with a black back
• Attenuation: Dependant on carbon loading (refer table below)
• Configurations: SAT-xxmm-yydB zz:
  xx = material thickness in mm
  yy = insertion loss dB/cm at 10 GHz
  zz = “PSA” adhesive or “WP” weatherproofing applied
• Installation: Generally neoprene contact adhesive is recommended for installation.