ESO(1) |
Reference and title of the harmonised standard
(and reference document) |
Reference of superseded standard |
Date of cessation of presumption of conformity of superseded standard
Note 1 |
CEN |
EN 617:2001 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
|
|
CEN |
EN 618:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
|
|
CEN |
EN 619:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
|
|
CEN |
EN 620:2002 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
|
|
CEN |
EN 1155:1997 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods |
|
|
CEN |
EN 12015:2004 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
EN 12015:1998
Note 2.1 |
Date expired
(30/06/2006) |
CEN |
EN 12016:2004+A1:2008 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
EN 12016:2004
Note 2.1
|
Date expired
(28/12/2009)
|
CEN |
EN 12895:2000
Industrial trucks - Electromagnetic compatibility
|
|
|
CEN |
EN 13241-1:2003
Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
|
|
|
CEN |
EN 13309:2000
Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply
|
|
|
CEN |
EN 14010:2003+A1:2009
Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
|
EN 14010:2003
Note 2.1
|
Date expired
(31/01/2010)
|
CEN |
EN ISO 14982:2009
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
|
EN ISO 14982:1998
Note 2.1
|
Date expired
(28/12/2009)
|
Cenelec |
EN 50065-1:2001
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 1: General requirements, frequency bands and electromagnetic disturbances
|
EN 50065-1:1991
+ A1:1992
+ A2:1995
+ A3:1996
Note 2.1
|
Date expired
(01/04/2003)
|
|
Cenelec |
EN 50065-2-1:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/10/2004)
|
EN 50065-2-1:2003/A1:2005
|
Note 3 |
Date expired
(01/07/2008) |
|
Cenelec |
EN 50065-2-2:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/10/2004)
|
EN 50065-2-2:2003/A1:2005
|
Note 3 |
Date expired
(01/07/2008) |
|
Cenelec |
EN 50065-2-3:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/08/2004)
|
EN 50065-2-3:2003/A1:2005
|
Note 3 |
Date expired
(01/07/2008) |
|
Cenelec |
EN 50083-2:2006
Cable networks for television signals, sound signals and interactive services -- Part 2: Electromagnetic compatibility for equipment
|
EN 50083-2:2001
+ A1:2005
Note 2.1
|
Date expired
(01/04/2009)
|
|
Cenelec |
EN 50090-2-2:1996
Home and Building Electronic Systems (HBES) -- Part 2-2: System overview - General technical requirements
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/10/1999)
|
EN 50090-2-2:1996/A2:2007
|
Note 3 |
01/11/2011 |
|
Cenelec |
EN 50121-1:2006
Railway applications - Electromagnetic compatibility -- Part 1: General
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 50121-2:2006
Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 50121-3-1:2006
Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 50121-3-2:2006
Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 50121-4:2006
Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 50121-5:2006
Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity of fixed power supply installations and apparatus
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 50130-4:1995
Alarm systems -- Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/01/2001)
|
EN 50130-4:1995/A1:1998
|
Note 3 |
Date expired
(01/01/2001) |
EN 50130-4:1995/A2:2003
|
Note 3 |
Date expired
(01/09/2007) |
|
Cenelec |
EN 50148:1995
Electronic taximeters
BT(IT/NOT)12
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(15/12/1995)
|
|
Cenelec |
EN 50240:2004
Electromagnetic compatibility (EMC) - Product standard for resistance welding equipment
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/04/2007)
|
|
Cenelec |
EN 50263:1999
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/08/2002)
|
|
Cenelec |
EN 50270:2006
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
|
EN 50270:1999
Note 2.1
|
Date expired
(01/06/2009)
|
|
Cenelec |
EN 50293:2000
Electromagnetic compatibility - Road traffic signal systems - Product standard
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/04/2003)
|
|
Cenelec |
EN 50295:1999
Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i)
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/12/1999)
|
|
Cenelec |
EN 50370-1:2005
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 1: Emission
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/02/2008)
|
|
Cenelec |
EN 50370-2:2003
Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 2: Immunity
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/11/2005)
|
|
Cenelec |
EN 50412-2-1:2005
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz -- Part 2-1: Residential, commercial and industrial environment - Immunity requirements
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/04/2008)
|
|
Cenelec |
EN 50428:2005
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/01/2008)
|
EN 50428:2005/A1:2007
|
Note 3 |
01/10/2010 |
|
Cenelec |
EN 50470-1:2006
Electricity metering equipment (a.c.) -- Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/05/2009)
|
|
Cenelec |
EN 50490:2008
Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps
|
Relevant generic standard(s)
Note 2.1
|
01/04/2011
|
|
Cenelec |
EN 55011:1998
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement
CISPR 11:1997 (Modified)
|
EN 55011:1991
+ A1:1997
+ A2:1996
Note 2.1
|
Date expired
(01/01/2001)
|
EN 55011:1998/A1:1999
CISPR 11:1997/A1:1999
|
Note 3 |
Date expired
(01/08/2002) |
EN 55011:1998/A2:2002
CISPR 11:1999/A2:2002
|
Note 3 |
Date expired
(01/10/2005) |
|
Cenelec |
EN 55011:2007
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
CISPR 11:2003 (Modified) + A1:2004 (Modified)
|
EN 55011:1998
and its amendments
Note 2.1
|
Date expired
(01/11/2009)
|
EN 55011:2007/A2:2007
CISPR 11:2003/A2:2006
|
Note 3 |
Date expired
(01/11/2009) |
|
Cenelec |
EN 55012:2002
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
CISPR 12:2001
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/02/2005)
|
EN 55012:2002/A1:2005
CISPR 12:2001/A1:2005
|
Note 3 |
Date expired
(01/03/2008) |
|
EN 55012 is applicable for giving presumption of conformity under directive 2004/108/EC for those vehicles, boats and internal combustion engine-driven devices that are not within the scope of directives 95/54/EC, 97/24/EC, 2000/2/EC or 2004/104/EC.
|
|
Cenelec |
EN 55012:2007
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers
CISPR 12:2007
|
EN 55012:2002
and its amendment
Note 2.1
|
01/09/2010
|
|
EN 55012 is applicable for giving presumption of conformity under directive 2004/108/EC for those vehicles, boats and internal combustion engine-driven devices that are not within the scope of directives 95/54/EC, 97/24/EC, 2000/2/EC or 2004/104/EC.
|
|
Cenelec |
EN 55013:2001
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
CISPR 13:2001 (Modified)
|
EN 55013:1990
+ A12:1994
+ A13:1996
+ A14:1999
Note 2.1
|
Date expired
(01/09/2004)
|
EN 55013:2001/A1:2003
CISPR 13:2001/A1:2003
|
Note 3 |
Date expired
(01/04/2006) |
EN 55013:2001/A2:2006
CISPR 13:2001/A2:2006
|
Note 3 |
Date expired
(01/03/2009) |
|
Cenelec |
EN 55014-1:2000
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
CISPR 14-1:2000
|
EN 55014-1:1993
+ A1:1997
+ A2:1999
Note 2.1
|
Date expired
(01/08/2003)
|
EN 55014-1:2000/A1:2001
CISPR 14-1:2000/A1:2001
|
Note 3 |
Date expired
(01/10/2004) |
EN 55014-1:2000/A2:2002
CISPR 14-1:2000/A2:2002
|
Note 3 |
Date expired
(01/10/2005) |
|
Cenelec |
EN 55014-1:2006
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
CISPR 14-1:2005
|
EN 55014-1:2000
and its amendments
Note 2.1
|
Date expired
(01/09/2009)
|
|
Cenelec |
EN 55014-2:1997
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard
CISPR 14-2:1997
|
EN 55104:1995
Note 2.1
|
Date expired
(01/01/2001)
|
EN 55014-2:1997/A1:2001
CISPR 14-2:1997/A1:2001
|
Note 3 |
Date expired
(01/12/2004) |
EN 55014-2:1997/A2:2008
CISPR 14-2:1997/A2:2008
|
Note 3 |
01/09/2011 |
|
Cenelec |
EN 55015:2000
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15:2000
|
EN 55015:1996
+ A1:1997
+ A2:1999
Note 2.1
|
Date expired
(01/08/2003)
|
EN 55015:2000/A1:2001
CISPR 15:2000/A1:2001
|
Note 3 |
Date expired
(01/12/2004) |
EN 55015:2000/A2:2002
CISPR 15:2000/A2:2002
|
Note 3 |
Date expired
(01/10/2005) |
|
Cenelec |
EN 55015:2006
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15:2005
|
EN 55015:2000
and its amendments
Note 2.1
|
Date expired
(01/09/2009)
|
EN 55015:2006/A1:2007
CISPR 15:2005/A1:2006
|
Note 3 |
01/05/2010 |
EN 55015:2006/A2:2009
CISPR 15:2005/A2:2008
|
Note 3 |
01/03/2012 |
|
Cenelec |
EN 55020:2002
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
CISPR 20:2002
|
EN 55020:1994
+ A11:1996
+ A12:1999
+ A13:1999
+ A14:1999
Note 2.1
|
Date expired
(01/12/2006)
|
EN 55020:2002/A1:2003
CISPR 20:2002/A1:2002
|
Note 3 |
Date expired
(01/12/2006) |
EN 55020:2002/A2:2005
CISPR 20:2002/A2:2004
|
Note 3 |
Date expired
(01/02/2008) |
|
Cenelec |
EN 55020:2007
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
CISPR 20:2006
|
EN 55020:2002
and its amendments
Note 2.1
|
Date expired
(01/12/2009)
|
|
Cenelec |
EN 55022:1998
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
CISPR 22:1997 (Modified)
|
EN 55022:1994
+ A1:1995
+ A2:1997
Note 2.1
|
Date expired
(01/08/2007)
|
EN 55022:1998/A1:2000
CISPR 22:1997/A1:2000
|
Note 3 |
Date expired
(01/10/2009) |
EN 55022:1998/A2:2003
CISPR 22:1997/A2:2002
|
Note 3 |
Date expired
(01/10/2009) |
Each of the four following standards provide presumption of conformity until 1.10.2011:
EN 55022:1998,
EN 55022:1998 + A1:2000,
EN 55022:1998 + A2:2003,
EN 55022:1998 + A1:2000 + A2:2003
|
|
Cenelec |
EN 55022:2006
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
CISPR 22:2005 (Modified)
|
EN 55022:1998
and its amendments
Note 2.1
|
01/10/2011
|
EN 55022:2006/A1:2007
CISPR 22:2005/A1:2005
|
Note 3 |
01/10/2011 |
|
Cenelec |
EN 55024:1998
Information technology equipment - Immunity characteristics - Limits and methods of measurement
CISPR 24:1997 (Modified)
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2001)
|
EN 55024:1998/A1:2001
CISPR 24:1997/A1:2001
|
Note 3 |
Date expired
(01/10/2004) |
EN 55024:1998/A2:2003
CISPR 24:1997/A2:2002
|
Note 3 |
Date expired
(01/12/2005) |
|
Cenelec |
EN 55103-1:1996
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 1: Emission
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/09/1999)
|
|
Cenelec |
EN 55103-2:1996
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 2: Immunity
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/09/1999)
|
|
Cenelec |
EN 60204-31:1998
Safety of machinery - Electrical equipment of machines -- Part 31: Particular safety and EMC requirements for sewing machines, units and systems
IEC 60204-31:1996 (Modified)
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/06/2002)
|
|
Cenelec |
EN 60439-1:1999
Low-voltage switchgear and controlgear assemblies -- Part 1: Type-tested and partially type-tested assemblies
IEC 60439-1:1999
|
EN 60439-1:1994
+ A11:1996
Note 2.1
|
Date expired
(01/08/2002)
|
|
Cenelec |
EN 60669-2-1:2004
Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches
IEC 60669-2-1:2002 (Modified)
|
EN 60669-2-1:2000
+ A2:2001
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 60669-2-2:1997
Switches for household and similar fixed electrical installations -- Part 2: Particular requirements -- Section 2: Electromagnetic remote-control switches (RCS)
IEC 60669-2-2:1996
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/06/1999)
|
|
Cenelec |
EN 60669-2-3:1997
Switches for household and similar fixed electrical installations -- Part 2-3: Particular requirements - Time-delay switches (TDS)
IEC 60669-2-3:1997
|
EN 60669-2-3:1996
Note 2.1
|
Date expired
(01/06/1999)
|
|
Cenelec |
EN 60730-1:1995
Automatic electrical controls for household and similar use -- Part 1: General requirements
IEC 60730-1:1993 (Modified)
|
|
|
EN 60730-1:1995/A11:1996
|
Note 3 |
Date expired
(01/01/1998) |
EN 60730-1:1995/A17:2000
|
Note 3 |
Date expired
(01/10/2002) |
|
Cenelec |
EN 60730-1:2000
Automatic electrical controls for household and similar use -- Part 1: General requirements
IEC 60730-1:1999 (Modified)
|
EN 60730-1:1995
and its amendments
Note 2.1
|
|
EN 60730-1:2000/A1:2004
IEC 60730-1:1999/A1:2003 (Modified)
|
Note 3 |
|
EN 60730-1:2000/A16:2007
|
Note 3 |
01/06/2010 |
EN 60730-1:2000/A2:2008
IEC 60730-1:1999/A2:2007 (Modified)
|
Note 3 |
01/06/2011 |
|
Cenelec |
EN 60730-2-5:2002
Automatic electrical controls for household and similar use -- Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 60730-2-5:2000 (Modified)
|
|
|
EN 60730-2-5:2002/A1:2004
IEC 60730-2-5:2000/A1:2004 (Modified)
|
Note 3 |
Date expired
(01/12/2008) |
EN 60730-2-5:2002/A11:2005
|
Note 3 |
Date expired
(01/12/2008) |
|
Cenelec |
EN 60730-2-6:1995
Automatic electrical controls for household and similar use -- Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:1991 (Modified)
|
|
|
EN 60730-2-6:1995/A1:1997
IEC 60730-2-6:1991/A1:1994 (Modified)
|
Note 3 |
Date expired
(15/12/2003) |
|
Cenelec |
EN 60730-2-6:2008
Automatic electrical controls for household and similar use -- Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2007 (Modified)
|
EN 60730-2-6:1995
and its amendment
Note 2.1
|
01/07/2011
|
|
Cenelec |
EN 60730-2-7:1991
Automatic electrical controls for household and similar use -- Part 2: Particular requirements for timers and time switches
IEC 60730-2-7:1990 (Modified)
|
|
|
EN 60730-2-7:1991/A1:1997
IEC 60730-2-7:1990/A1:1994 (Modified)
|
Note 3 |
Date expired
(01/01/2004) |
|
Cenelec |
EN 60730-2-8:2002
Automatic electrical controls for household and similar use -- Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
IEC 60730-2-8:2000 (Modified)
|
EN 60730-2-8:1995
+ A1:1997
+ A2:1997
Note 2.1
|
Date expired
(01/12/2008)
|
EN 60730-2-8:2002/A1:2003
IEC 60730-2-8:2000/A1:2002 (Modified)
|
Note 3 |
Date expired
(01/12/2008) |
|
Cenelec |
EN 60730-2-9:2002
Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls
IEC 60730-2-9:2000 (Modified)
|
EN 60730-2-9:1995
+ A1:1996
+ A2:1997
Note 2.1
|
Date expired
(01/12/2008)
|
EN 60730-2-9:2002/A1:2003
IEC 60730-2-9:2000/A1:2002 (Modified)
|
Note 3 |
Date expired
(01/12/2008) |
EN 60730-2-9:2002/A2:2005
IEC 60730-2-9:2000/A2:2004 (Modified)
|
Note 3 |
Date expired
(01/12/2007) |
|
Cenelec |
EN 60730-2-11:1993
Automatic electrical controls for household and similar use -- Part 2-11: Particular requirements for energy regulators
IEC 60730-2-11:1993
|
|
|
EN 60730-2-11:1993/A1:1997
IEC 60730-2-11:1993/A1:1994 (Modified)
|
Note 3 |
Date expired
(01/07/2000) |
EN 60730-2-11:1993/A11:2005
|
Note 3 |
Date expired
(01/03/2009) |
|
Cenelec |
EN 60730-2-13:1998
Automatic electrical controls for household and similar use -- Part 2-13: Particular requirements for humidity sensing controls
IEC 60730-2-13:1995 (Modified)
|
EN 60730-1:1995
and its amendments
Note 2.1
|
Date expired
(01/08/2001)
|
EN 60730-2-13:1998/A11:2005
|
Note 3 |
Date expired
(01/02/2009) |
|
Cenelec |
EN 60730-2-14:1997
Automatic electrical controls for household and similar use -- Part 2-14: Particular requirements for electric actuators
IEC 60730-2-14:1995 (Modified)
|
EN 60730-1:1995
and its amendments
Note 2.1
|
Date expired
(01/06/2004)
|
EN 60730-2-14:1997/A1:2001
IEC 60730-2-14:1995/A1:2001
|
Note 3 |
Date expired
(01/07/2008) |
|
Cenelec |
EN 60730-2-18:1999
Automatic electrical controls for household and similar use -- Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
IEC 60730-2-18:1997 (Modified)
|
EN 60730-1:1995
and its amendments
Note 2.1
|
Date expired
(01/04/2002)
|
|
Cenelec |
EN 60870-2-1:1996
Telecontrol equipment and systems -- Part 2: Operating conditions -- Section 1: Power supply and electromagnetic compatibility
IEC 60870-2-1:1995
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/09/1996)
|
|
Cenelec |
EN 60945:2002
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
IEC 60945:2002
|
EN 60945:1997
Note 2.1
|
Date expired
(01/10/2005)
|
|
Cenelec |
EN 60947-1:2004
Low-voltage switchgear and controlgear -- Part 1: General rules
IEC 60947-1:2004
|
EN 60947-1:1999
+ A2:2001
Note 2.1
|
Date expired
(01/04/2007)
|
|
EN 60947-1:1999 does not give presumption of conformity without another part of the standard. EN 60947-1:2004 does not give presumption of conformity without another part of the standard.
|
|
Cenelec |
EN 60947-1:2007
Low-voltage switchgear and controlgear -- Part 1: General rules
IEC 60947-1:2007
|
EN 60947-1:2004
Note 2.1
|
01/07/2010
|
|
EN 60947-1:1999 does not give presumption of conformity without another part of the standard. EN 60947-1:2004 does not give presumption of conformity without another part of the standard.
|
|
Cenelec |
EN 60947-2:2006
Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers
IEC 60947-2:2006
|
EN 60947-2:2003
Note 2.1
|
Date expired
(01/07/2009)
|
|
Cenelec |
EN 60947-3:1999
Low-voltage switchgear and controlgear -- Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:1999
|
EN 60947-3:1992
+ A1:1995
Note 2.1
|
Date expired
(01/01/2002)
|
EN 60947-3:1999/A1:2001
IEC 60947-3:1999/A1:2001
|
Note 3 |
Date expired
(01/03/2004) |
|
Cenelec |
EN 60947-4-1:2001
Low-voltage switchgear and controlgear -- Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60947-4-1:2000
|
|
|
EN 60947-4-1:2001/A1:2002
IEC 60947-4-1:2000/A1:2002
|
Note 3 |
Date expired
(01/10/2005) |
EN 60947-4-1:2001/A2:2005
IEC 60947-4-1:2000/A2:2005
|
Note 3 |
Date expired
(01/07/2008) |
|
Cenelec |
EN 60947-4-2:2000
Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
IEC 60947-4-2:1999
|
EN 60947-4-2:1996
+ A2:1998
Note 2.1
|
Date expired
(01/12/2002)
|
EN 60947-4-2:2000/A1:2002
IEC 60947-4-2:1999/A1:2001
|
Note 3 |
Date expired
(01/03/2005) |
EN 60947-4-2:2000/A2:2006
IEC 60947-4-2:1999/A2:2006
|
Note 3 |
Date expired
(01/12/2009) |
|
Cenelec |
EN 60947-4-3:2000
Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3:1999
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/12/2002)
|
EN 60947-4-3:2000/A1:2006
IEC 60947-4-3:1999/A1:2006
|
Note 3 |
Date expired
(01/11/2009) |
|
Cenelec |
EN 60947-5-1:2004
Low-voltage switchgear and controlgear -- Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
IEC 60947-5-1:2003
|
EN 60947-5-1:1997
+ A12:1999
Note 2.1
|
Date expired
(01/05/2007)
|
|
Cenelec |
EN 60947-5-2:1998
Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches
IEC 60947-5-2:1997 (Modified)
|
EN 60947-5-2:1997
Note 2.1
|
Date expired
(01/10/2001)
|
EN 60947-5-2:1998/A2:2004
IEC 60947-5-2:1997/A2:2003
|
Note 3 |
Date expired
(01/02/2007) |
|
Cenelec |
EN 60947-5-2:2007
Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements - Proximity switches
IEC 60947-5-2:2007
|
EN 60947-5-2:1998
and its amendment
Note 2.1
|
01/11/2010
|
|
Cenelec |
EN 60947-5-3:1999
Low-voltage switchgear and controlgear -- Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
IEC 60947-5-3:1999
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/05/2002)
|
EN 60947-5-3:1999/A1:2005
IEC 60947-5-3:1999/A1:2005
|
Note 3 |
Date expired
(01/03/2008) |
|
Cenelec |
EN 60947-5-6:2000
Low-voltage switchgear and controlgear -- Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
IEC 60947-5-6:1999
|
EN 50227:1997
Note 2.1
|
Date expired
(01/01/2003)
|
|
Cenelec |
EN 60947-5-7:2003
Low-voltage switchgear and controlgear -- Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
IEC 60947-5-7:2003
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/09/2006)
|
|
Cenelec |
EN 60947-5-9:2007
Low-voltage switchgear and controlgear -- Part 5-9: Control circuit devices and switching elements - Flow rate switches
IEC 60947-5-9:2006
|
|
|
|
Cenelec |
EN 60947-6-1:2005
Low-voltage switchgear and controlgear -- Part 6-1: Multiple function equipment - Transfer switching equipment
IEC 60947-6-1:2005
|
EN 60947-6-1:1991
+ A2:1997
Note 2.1
|
Date expired
(01/10/2008)
|
|
Cenelec |
EN 60947-6-2:2003
Low-voltage switchgear and controlgear -- Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
IEC 60947-6-2:2002
|
EN 60947-6-2:1993
+ A1:1997
Note 2.1
|
Date expired
(01/09/2005)
|
EN 60947-6-2:2003/A1:2007
IEC 60947-6-2:2002/A1:2007
|
Note 3 |
Date expired
(01/03/2010) |
|
Cenelec |
EN 60947-8:2003
Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
IEC 60947-8:2003
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2006)
|
EN 60947-8:2003/A1:2006
IEC 60947-8:2003/A1:2006
|
Note 3 |
Date expired
(01/10/2009) |
|
Cenelec |
EN 60974-10:2003
Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements
IEC 60974-10:2002 (Modified)
|
EN 50199:1995
Note 2.1
|
Date expired
(01/03/2006)
|
|
Cenelec |
EN 60974-10:2007
Arc welding equipment -- Part 10: Electromagnetic compatibility (EMC) requirements
IEC 60974-10:2007
|
EN 60974-10:2003
Note 2.1
|
01/12/2010
|
|
Cenelec |
EN 61000-3-2:2006
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
IEC 61000-3-2:2005
|
EN 61000-3-2:2000
+ A2:2005
Note 2.1
|
Date expired
(01/02/2009)
|
|
Cenelec |
EN 61000-3-3:1995
Electromagnetic compatibility (EMC) -- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
IEC 61000-3-3:1994
|
EN 60555-3:1987
+ A1:1991
Note 2.1
|
Date expired
(01/01/2001)
|
EN 61000-3-3:1995/A1:2001
IEC 61000-3-3:1994/A1:2001
|
Note 3 |
Date expired
(01/05/2004) |
EN 61000-3-3:1995/A2:2005
IEC 61000-3-3:1994/A2:2005
|
Note 3 |
Date expired
(01/09/2008) |
|
Cenelec |
EN 61000-3-3:2008
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
IEC 61000-3-3:2008
|
EN 61000-3-3:1995
and its amendments
Note 2.1
|
01/09/2011
|
|
Cenelec |
EN 61000-3-11:2000
Electromagnetic compatibility (EMC) -- Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
IEC 61000-3-11:2000
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/11/2003)
|
|
Cenelec |
EN 61000-3-12:2005
Electromagnetic compatibility (EMC) -- Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
IEC 61000-3-12:2004
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/02/2008)
|
|
Cenelec |
EN 61000-6-1:2001
Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
IEC 61000-6-1:1997 (Modified)
|
EN 50082-1:1997
Note 2.1
|
Date expired
(01/07/2004)
|
|
Cenelec |
EN 61000-6-1:2007
Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
IEC 61000-6-1:2005
|
EN 61000-6-1:2001
Note 2.1
|
Date expired
(01/12/2009)
|
|
Cenelec |
EN 61000-6-2:2005
Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial environments
IEC 61000-6-2:2005
|
EN 61000-6-2:2001
Note 2.1
|
Date expired
(01/06/2008)
|
|
Cenelec |
EN 61000-6-3:2001
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
CISPR/IEC 61000-6-3:1996 (Modified)
|
EN 50081-1:1992
Note 2.1
|
Date expired
(01/07/2004)
|
EN 61000-6-3:2001/A11:2004
|
Note 3 |
Date expired
(01/07/2007) |
|
Cenelec |
EN 61000-6-3:2007
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
IEC 61000-6-3:2006
|
EN 61000-6-3:2001
and its amendment
Note 2.1
|
Date expired
(01/12/2009)
|
|
Cenelec |
EN 61000-6-4:2001
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments
IEC 61000-6-4:1997 (Modified)
|
EN 50081-2:1993
Note 2.1
|
Date expired
(01/07/2004)
|
|
Cenelec |
EN 61000-6-4:2007
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments
IEC 61000-6-4:2006
|
EN 61000-6-4:2001
Note 2.1
|
Date expired
(01/12/2009)
|
|
Cenelec |
EN 61008-1:2004
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) -- Part 1: General rules
IEC 61008-1:1996 (Modified) + A1:2002 (Modified)
|
EN 61008-1:1994
+ A2:1995
+ A14:1998
Note 2.1
|
Date expired
(01/04/2009)
|
EN 61008-1:2004/A12:2009
|
Note 3 |
01/12/2011 |
|
Cenelec |
EN 61009-1:2004
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) -- Part 1: General rules
IEC 61009-1:1996 (Modified) + A1:2002 (Modified)
|
EN 61009-1:1994
+ A1:1995
+ A14:1998
Note 2.1
|
Date expired
(01/04/2009)
|
EN 61009-1:2004/A13:2009
|
Note 3 |
01/12/2011 |
EN 61009-1:2004/A12:2009
|
Note 3 |
01/12/2011 |
|
Cenelec |
EN 61131-2:2003
Programmable controllers -- Part 2: Equipment requirements and tests
IEC 61131-2:2003
|
EN 61131-2:1994
+ A11:1996
+ A12:2000
Note 2.1
|
Date expired
(01/05/2006)
|
|
Cenelec |
EN 61131-2:2007
Programmable controllers -- Part 2: Equipment requirements and tests
IEC 61131-2:2007
|
EN 61131-2:2003
Note 2.1
|
01/08/2010
|
|
Cenelec |
EN 61204-3:2000
Low voltage power supplies, d.c. output -- Part 3: Electromagnetic compatibility (EMC)
IEC 61204-3:2000
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/11/2003)
|
|
Cenelec |
EN 61326:1997
Electrical equipment for measurement, control and laboratory use - EMC requirements
IEC 61326:1997
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/2001)
|
EN 61326:1997/A1:1998
IEC 61326:1997/A1:1998
|
Note 3 |
Date expired
(01/07/2001) |
EN 61326:1997/A2:2001
IEC 61326:1997/A2:2000
|
Note 3 |
Date expired
(01/04/2004) |
EN 61326:1997/A3:2003
IEC 61326:2002 (Annexes E & F only) + IEC
|
Note 3 |
Date expired
(01/10/2006) |
|
Cenelec |
EN 61326-1:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
IEC 61326-1:2005
|
EN 61326:1997
and its amendments
Note 2.1
|
Date expired
(01/02/2009)
|
|
Cenelec |
EN 61326-2-1:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
IEC 61326-2-1:2005
|
EN 61326:1997
and its amendments
Note 2.1
|
Date expired
(01/02/2009)
|
|
Cenelec |
EN 61326-2-2:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
IEC 61326-2-2:2005
|
EN 61326:1997
and its amendments
Note 2.1
|
Date expired
(01/02/2009)
|
|
Cenelec |
EN 61326-2-3:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
IEC 61326-2-3:2006
|
EN 61326:1997
and its amendments
Note 2.1
|
Date expired
(01/08/2009)
|
|
Cenelec |
EN 61326-2-4:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
IEC 61326-2-4:2006
|
EN 61326:1997
and its amendments
Note 2.1
|
Date expired
(01/11/2009)
|
|
Cenelec |
EN 61326-2-5:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
IEC 61326-2-5:2006
|
EN 61326:1997
and its amendments
Note 2.1
|
Date expired
(01/09/2009)
|
|
Cenelec |
EN 61543:1995
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
IEC 61543:1995
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(04/07/1998)
|
EN 61543:1995/A11:2003
|
Note 3 |
Date expired
(01/03/2007) |
EN 61543:1995/A12:2005
|
Note 3 |
Date expired
(01/03/2008) |
EN 61543:1995/A2:2006
IEC 61543:1995/A2:2005
|
Note 3 |
Date expired
(01/12/2008) |
|
Cenelec |
EN 61547:1995
Equipment for general lighting purposes - EMC immunity requirements
IEC 61547:1995
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/07/1996)
|
EN 61547:1995/A1:2000
IEC 61547:1995/A1:2000
|
Note 3 |
Date expired
(01/11/2003) |
|
Cenelec |
EN 61557-12:2008
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD)
IEC 61557-12:2007
|
|
|
|
Cenelec |
EN 61800-3:2004
Adjustable speed electrical power drive systems -- Part 3: EMC requirements and specific test methods
IEC 61800-3:2004
|
EN 61800-3:1996
+ A11:2000
Note 2.1
|
Date expired
(01/10/2007)
|
|
Cenelec |
EN 61812-1:1996
Specified time relays for industrial use -- Part 1: Requirements and tests
IEC 61812-1:1996
|
|
|
EN 61812-1:1996/A11:1999
|
Note 3 |
Date expired
(01/01/2002) |
|
Cenelec |
EN 62020:1998
Electrical accessories - Residual current monitors for household and similar uses (RCMs)
IEC 62020:1998
|
|
|
EN 62020:1998/A1:2005
IEC 62020:1998/A1:2003 (Modified)
|
Note 3 |
Date expired
(01/03/2008) |
|
Cenelec |
EN 62026-1:2007
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) -- Part 1: General rules
IEC 62026-1:2007
|
Relevant generic standard(s)
Note 2.1
|
01/09/2010
|
|
EN 62026-1:2007 does not give presumption of conformity without another part of the standard.
|
|
Cenelec |
EN 62040-2:2006
Uninterruptible power systems (UPS) -- Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62040-2:2005
|
EN 50091-2:1995
Note 2.1
|
Date expired
(01/10/2008)
|
|
Cenelec |
EN 62052-11:2003
Electricity metering equipment (AC) - General requirements, tests and test conditions -- Part 11: Metering equipment
IEC 62052-11:2003
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/03/2006)
|
|
EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.
|
|
Cenelec |
EN 62052-21:2004
Electricity metering equipment (a.c.) - General requirements, tests and test conditions -- Part 21: Tariff and load control equipment
IEC 62052-21:2004
|
EN 61037:1992
+ A1:1996
+ A2:1998
+ EN 61038:1992
+ A1:1996
+ A2:1998
Note 2.1
|
Date expired
(01/07/2007)
|
|
EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series.
|
|
Cenelec |
EN 62053-11:2003
Electricity metering equipment (a.c.) - Particular requirements -- Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
IEC 62053-11:2003
|
EN 60521:1995
Note 2.1
|
Date expired
(01/03/2006)
|
|
Cenelec |
EN 62053-21:2003
Electricity metering equipment (a.c.) - Particular requirements -- Part 21: Static meters for active energy (classes 1 and 2)
IEC 62053-21:2003
|
EN 61036:1996
+ A1:2000
Note 2.1
|
Date expired
(01/03/2006)
|
|
Cenelec |
EN 62053-22:2003
Electricity metering equipment (a.c.) - Particular requirements -- Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
IEC 62053-22:2003
|
EN 60687:1992
Note 2.1
|
Date expired
(01/03/2006)
|
|
Cenelec |
EN 62053-23:2003
Electricity metering equipment (a.c.) - Particular requirements -- Part 23: Static meters for reactive energy (classes 2 and 3)
IEC 62053-23:2003
|
EN 61268:1996
Note 2.1
|
Date expired
(01/03/2006)
|
|
Cenelec |
EN 62054-11:2004
Electricity metering (a.c.) - Tariff and load control -- Part 11: Particular requirements for electronic ripple control receivers
IEC 62054-11:2004
|
EN 61037:1992
+ A1:1996
+ A2:1998
Note 2.1
|
Date expired
(01/07/2007)
|
|
Cenelec |
EN 62054-21:2004
Electricity metering (a.c.) - Tariff and load control -- Part 21: Particular requirements for time switches
IEC 62054-21:2004
|
EN 61038:1992
+ A1:1996
+ A2:1998
Note 2.1
|
Date expired
(01/07/2007)
|
|
Cenelec |
EN 62135-2:2008
Resistance welding equipment -- Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62135-2:2007
|
EN 50240:2004
Note 2.1
|
01/02/2011
|
|
Cenelec |
EN 62310-2:2007
Static transfer systems (STS) -- Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62310-2:2006 (Modified)
|
Relevant generic standard(s)
Note 2.1
|
Date expired
(01/09/2009)
|
|
ETSI |
EN 300 386 V1.2.1
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
|
EN 300 386-2 V1.1.3
Note 2.1
|
Date expired
(31/08/2007)
|
|
ETSI |
EN 300 386 V1.3.1
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
|
EN 300 386-2 V1.1.3
Note 2.1
|
Date expired
(31/08/2007)
|
|
ETSI |
EN 300 386 V1.3.2
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements
|
EN 300 386-2 V1.1.3
Note 2.1
|
Date expired
(31/08/2007)
|
ETSI |
EN 300 386 V1.3.3 Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements |
EN 300 386-2 V1.1.3
Note 2.1 |
Date expired
(31/08/2007) |
ETSI |
EN 300 386 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
EN 300 386 V1.3.3
Note 2.1 |
31/07/2011 |