EMC Standards for CE Compliance

ESO
(1)

Reference and title of the harmonised standard

(and reference document)

Reference of superseded standard

Date of cessation of presumption of conformity of superseded standard

Note 1

Continuous handling equipment and systems – Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

EN 617:2001

Note 2.1

Date expired
(30/06/2011)

Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

EN 618:2002

Note 2.1

Date expired
(30/06/2011)

Continuous handling equipment and systems – Safety and EMC requirements for equipment for mechanical handling of unit loads

EN 619:2002

Note 2.1

Date expired
(30/04/2011)

Continuous handling equipment and systems – Safety and EMC requirements for fixed belt conveyors for bulk materials

EN 620:2002

Note 2.1

Date expired
(30/06/2011)

Building hardware – Electrically powered hold-open devices for swing doors – Requirements and test methods

Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Emission

EN 12015:1998

Note 2.1

Date expired
(30/06/2006)

Electromagnetic compatibility – Product family standard for lifts, escalators and moving walks – Immunity

EN 12016:2004

Note 2.1

Date expired
(28/12/2009)

Industrial trucks – Electromagnetic compatibility

Industrial, commercial and garage doors and gates – Product standard – Part 1: Products without fire resistance or smoke control characteristics

EN 13241-1:2003

Note 2.1

Date expired
(31/10/2011)

Construction machinery – Electromagnetic compatibility of machines with internal power supply

EN 13309:2000

Note 2.1

Date expired
(31/01/2011)

Safety of machinery – Equipment for power driven parking of motor vehicles – Safety and EMC requirements for design, manufacturing, erection and commissioning stages

EN 14010:2003

Note 2.1

Date expired
(31/01/2010)

Agricultural and forestry machinery – Electromagnetic compatibility – Test methods and acceptance criteria (ISO 14982:1998)

EN ISO 14982:1998

Note 2.1

Date expired
(28/12/2009)

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances

EN 50065-1:1991
+ A1:1992
+ A2:1995
+ A3:1996

Note 2.1

Date expired
(01/04/2003)

Note 3

01/10/2012

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 1: General requirements, frequency bands and electromagnetic disturbances

EN 50065-1:2001
and its amendment

Note 2.1

21/03/2014

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments

Relevant generic standard(s)

Note 2.3

Date expired
(01/10/2004)

Note 3

Date expired
(01/07/2008)

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments

Relevant generic standard(s)

Note 2.3

Date expired
(01/10/2004)

Note 3

Date expired
(01/07/2008)

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz — Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors

Relevant generic standard(s)

Note 2.1

Date expired
(01/08/2004)

Note 3

Date expired
(01/07/2008)

Cable networks for television signals, sound signals and interactive services — Part 2: Electromagnetic compatibility for equipment

EN 50083-2:2001
+ A1:2005

Note 2.1

Date expired
(01/04/2009)

Cable networks for television signals, sound signals and interactive services — Part 2: Electromagnetic compatibility for equipment

EN 50083-2:2006

Note 2.1

21/06/2013

Home and Building Electronic Systems (HBES) — Part 2-2: System overview – General technical requirements

Relevant generic standard(s)

Note 2.3

Date expired
(01/10/1999)

Note 3

Date expired
(01/11/2011)

Railway applications – Electromagnetic compatibility — Part 1: General

Relevant generic standard(s)

Note 2.1

Date expired
(01/07/2009)

Railway applications – Electromagnetic compatibility — Part 2: Emission of the whole railway system to the outside world

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/2009)

Railway applications – Electromagnetic compatibility — Part 3-1: Rolling stock – Train and complete vehicle

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/2009)

Railway applications – Electromagnetic compatibility — Part 3-2: Rolling stock – Apparatus

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/2009)

Railway applications – Electromagnetic compatibility — Part 4: Emission and immunity of the signalling and telecommunications apparatus

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/2009)

Railway applications – Electromagnetic compatibility — Part 5: Emission and immunity of fixed power supply installations and apparatus

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/2009)

Alarm systems — Part 4: Electromagnetic compatibility – Product family standard: Immunity requirements for components of fire, intruder and social alarm systems

Relevant generic standard(s)

Note 2.3

Date expired
(01/01/2001)

Note 3

Date expired
(01/01/2001)

Note 3

Date expired
(01/09/2007)

Alarm systems — Part 4: Electromagnetic compatibility – Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems

EN 50130-4:1995
and its amendments

Note 2.1

13/06/2014

Electronic taximeters
BT(IT/NOT)12

Relevant generic standard(s)

Note 2.3

Date expired
(15/12/1995)

Electromagnetic compatibility (EMC) – Product standard for measuring relays and protection equipment

Relevant generic standard(s)

Note 2.3

Date expired
(01/08/2002)

Electromagnetic compatibility – Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

EN 50270:1999

Note 2.3

Date expired
(01/06/2009)

Electromagnetic compatibility – Road traffic signal systems – Product standard

Relevant generic standard(s)

Note 2.3

Date expired
(01/04/2003)

Low-voltage switchgear and controlgear – Controller and device interface systems – Actuator Sensor interface (AS-i)

Relevant generic standard(s)

Note 2.3

Date expired
(01/12/1999)

Electromagnetic compatibility (EMC) – Product family standard for machine tools — Part 1: Emission

Relevant generic standard(s)

Note 2.3

Date expired
(01/02/2008)

Electromagnetic compatibility (EMC) – Product family standard for machine tools — Part 2: Immunity

Relevant generic standard(s)

Note 2.3

Date expired
(01/11/2005)

Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz — Part 2-1: Residential, commercial and industrial environment – Immunity requirements

Relevant generic standard(s)

Note 2.3

Date expired
(01/04/2008)

Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and building electronic systems (HBES)

Relevant generic standard(s)

Note 2.3

Date expired
(01/01/2008)

Note 3

Date expired
(01/10/2010)

Note 3

Date expired
(01/06/2012)

Electricity metering equipment (a.c.) — Part 1: General requirements, tests and test conditions – Metering equipment (class indexes A, B and C)

Relevant generic standard(s)

Note 2.3

Date expired
(01/05/2009)

Electrical installations for lighting and beaconing of aerodromes – Technical requirements for aeronautical ground lighting control and monitoring systems – Units for selective switching and monitoring of individual lamps

Relevant generic standard(s)

Note 2.3

Date expired
(01/04/2011)

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-1: EMC requirements, conditions and test set-up

EN 50090-2-2:1996
and its amendments

Note 2.1

01/04/2013

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment

EN 50090-2-2:1996
and its amendments

Note 2.1

01/04/2013

General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) — Part 5-3: EMC requirements for HBES/BACS used in industry environment

EN 50090-2-2:1996
and its amendments

Note 2.1

01/04/2013

Electromagnetic compatibility (EMC) – Product family standard for aftermarket electronic equipment in vehicles

Relevant generic standard(s)

Note 2.1

01/07/2013

Electrical installations for lighting and beaconing of aerodromes – Advanced Visual Docking Guidance Systems (A-VDGS)

Relevant generic standard(s)

Note 2.1

EMC Network Standard — Part 1: Wire-line telecommunications networks using telephone wires

EMC Network Standard — Part 2: Wire-line telecommunications networks using coaxial cables

Power frequency overvoltage protective device for household and similar applications (POP)

Industrial, scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement
CISPR 11:2003 (Modified) + A1:2004 (Modified)

EN 55011:1998
+ A1:1999
+ A2:2002

Note 2.1

Date expired
(01/11/2009)

Note 3

Date expired
(01/11/2009)

Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
CISPR 11:2009 (Modified)

EN 55011:2007
and its amendment

Note 2.1

Date expired
(01/09/2012)

Note 3

01/07/2013

Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers
CISPR 12:2007

EN 55012:2002
+ A1:2005

Note 2.1

Date expired
(01/09/2010)

Note 3

Date expired
(01/07/2012)

Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement
CISPR 13:2001 (Modified)

EN 55013:1990
+ A12:1994
+ A13:1996
+ A14:1999

Note 2.1

Date expired
(01/09/2004)

Note 3

Date expired
(01/04/2006)

Note 3

Date expired
(01/03/2009)

Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus — Part 1: Emission
CISPR 14-1:2005

EN 55014-1:2000
+ A1:2001
+ A2:2002

Note 2.1

Date expired
(01/09/2009)

Note 3

Date expired
(01/05/2012)

Note 3

16/08/2014

Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus — Part 2: Immunity – Product family standard
CISPR 14-2:1997

EN 55104:1995

Note 2.1

Date expired
(01/01/2001)

Note 3

Date expired
(01/12/2004)

Note 3

Date expired
(01/09/2011)

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
CISPR 15:2005

EN 55015:2000
+ A1:2001
+ A2:2002

Note 2.1

Date expired
(01/09/2009)

Note 3

Date expired
(01/05/2010)

Note 3

Date expired
(01/03/2012)

Sound and television broadcast receivers and associated equipment – Immunity characteristics – Limits and methods of measurement
CISPR 20:2006

EN 55020:2002
+ A1:2003
+ A2:2005

Note 2.1

Date expired
(01/12/2009)

Note 3

01/01/2013

Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
CISPR 22:2005 (Modified)

EN 55022:1998
+ A1:2000
+ A2:2003

Note 2.1

Date expired
(01/10/2011)

Note 3

Date expired
(01/10/2011)

Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement
CISPR 22:2008 (Modified)

EN 55022:2006
and its amendments

Note 2.1

01/12/2013

Information technology equipment – Immunity characteristics – Limits and methods of measurement
CISPR 24:1997 (Modified)

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/2001)

Note 3

Date expired
(01/10/2004)

Note 3

Date expired
(01/12/2005)

Information technology equipment – Immunity characteristics – Limits and methods of measurement
CISPR 24:2010

EN 55024:1998
and its amendments

Note 2.1

01/12/2013

Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 1: Emission

Relevant generic standard(s)

Note 2.3

Date expired
(01/09/1999)

Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 1: Emissions

EN 55103-1:1996

Note 2.1

Date expired
(01/07/2012)

Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 2: Immunity

Relevant generic standard(s)

Note 2.3

Date expired
(01/09/1999)

Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use — Part 2: Immunity

EN 55103-2:1996

Note 2.1

Date expired
(01/07/2012)

Rotating electrical machines — Part 1: Rating and performance
IEC 60034-1:2010 (Modified)

Relevant generic standard(s)

Note 2.1

01/10/2013

Safety of machinery – Electrical equipment of machines — Part 31: Particular safety and EMC requirements for sewing machines, units and systems
IEC 60204-31:1996 (Modified)

Relevant generic standard(s)

Note 2.3

Date expired
(01/06/2002)

Low-voltage switchgear and controlgear assemblies — Part 1: Type-tested and partially type-tested assemblies
IEC 60439-1:1999

EN 60439-1:1994
+ A11:1996

Note 2.1

Date expired
(01/08/2002)

Switches for household and similar fixed electrical installations — Part 2-1: Particular requirements – Electronic switches
IEC 60669-2-1:2002 (Modified) + IS1:2011 + IS2:2012

EN 60669-2-1:2000
+ A2:2001

Note 2.3

Date expired
(01/07/2009)

Note 3

Date expired
(01/04/2012)

Note 3

01/06/2013

Automatic electrical controls for household and similar use — Part 1: General requirements
IEC 60730-1:1993 (Modified)

Note 3

Date expired
(01/01/1998)

Note 3

Date expired
(01/10/2002)

Automatic electrical controls for household and similar use — Part 1: General requirements
IEC 60730-1:1999 (Modified)

EN 60730-1:1995
and its amendments

Note 2.1

Note 3

Note 3

Date expired
(01/06/2010)

Note 3

Date expired
(01/06/2011)

Automatic electrical controls for household and similar use — Part 1: General requirements
IEC 60730-1:2010 (Modified)

EN 60730-1:2000
and its amendments

Note 2.1

01/10/2013

Automatic electrical controls for household and similar use — Part 2-5: Particular requirements for automatic electrical burner control systems
IEC 60730-2-5:2000 (Modified)

Note 3

Date expired
(01/12/2008)

Note 3

Date expired
(01/12/2008)

Note 3

01/03/2013

Automatic electrical controls for household and similar use — Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
IEC 60730-2-6:2007 (Modified)

EN 60730-2-6:1995
+ A1:1997

Date expired
(01/07/2011)

Automatic electrical controls for household and similar use — Part 2: Particular requirements for timers and time switches
IEC 60730-2-7:1990 (Modified)

Note 3

Date expired
(01/01/2004)

Automatic electrical controls for household and similar use — Part 2-7: Particular requirements for timers and time switches
IEC 60730-2-7:2008 (Modified)

EN 60730-2-7:1991
and its amendment

Note 2.1

01/10/2013

Automatic electrical controls for household and similar use — Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
IEC 60730-2-8:2000 (Modified)

EN 60730-2-8:1995
+ A1:1997
+ A2:1997

Note 2.1

Date expired
(01/12/2008)

Note 3

Date expired
(01/12/2008)

Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls
IEC 60730-2-9:2000 (Modified)

EN 60730-2-9:1995
+ A1:1996
+ A2:1997

Note 2.1

Date expired
(01/12/2008)

Note 3

Date expired
(01/12/2008)

Note 3

Date expired
(01/12/2007)

Automatic electrical controls for household and similar use — Part 2-9: Particular requirements for temperature sensing controls
IEC 60730-2-9:2008 (Modified)

EN 60730-2-9:2002
and its amendments

Note 2.1

01/11/2013

Automatic electrical controls for household and similar use — Part 2-14: Particular requirements for electric actuators
IEC 60730-2-14:1995 (Modified)

EN 60730-1:1995
and its amendments

Note 2.3

Date expired
(01/06/2004)

Note 3

Date expired
(01/07/2008)

Automatic electrical controls for household and similar use — Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls
IEC 60730-2-15:2008 (Modified)

EN 60730-2-18:1999

Note 2.1

01/03/2013

Automatic electrical controls for household and similar use — Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
IEC 60730-2-18:1997 (Modified)

EN 60730-1:1995
and its amendments

Note 2.3

Date expired
(01/04/2002)

Telecontrol equipment and systems — Part 2: Operating conditions — Section 1: Power supply and electromagnetic compatibility
IEC 60870-2-1:1995

Relevant generic standard(s)

Note 2.3

Date expired
(01/09/1996)

Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
IEC 60945:2002

EN 60945:1997

Note 2.1

Date expired
(01/10/2005)

Low-voltage switchgear and controlgear — Part 1: General rules
IEC 60947-1:2007

EN 60947-1:2004

Note 2.1

Date expired
(01/07/2010)

Note 3

01/01/2014

Low-voltage switchgear and controlgear — Part 2: Circuit-breakers
IEC 60947-2:2006

EN 60947-2:2003

Note 2.1

Date expired
(01/07/2009)

Note 3

Date expired
(01/07/2012)

Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-3:2008

EN 60947-3:1999
+ A1:2001

Note 2.1

Date expired
(01/05/2012)

Note 3

21/03/2015

Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
IEC 60947-4-1:2000

Note 3

Date expired
(01/10/2005)

Note 3

Date expired
(01/07/2008)

Low-voltage switchgear and controlgear — Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
IEC 60947-4-1:2009

EN 60947-4-1:2001
and its amendments

Note 2.1

01/04/2013

Low-voltage switchgear and controlgear — Part 4-2: Contactors and motor-starters – AC semiconductor motor controllers and starters
IEC 60947-4-2:1999

EN 60947-4-2:1996
+ A2:1998

Note 2.1

Date expired
(01/12/2002)

Note 3

Date expired
(01/03/2005)

Note 3

Date expired
(01/12/2009)

Low-voltage switchgear and controlgear — Part 4-3: Contactors and motor-starters – AC semiconductor controllers and contactors for non-motor loads
IEC 60947-4-3:1999

Relevant generic standard(s)

Note 2.3

Date expired
(01/12/2002)

Note 3

Date expired
(01/11/2009)

Note 3

18/04/2014

Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices
IEC 60947-5-1:2003

EN 60947-5-1:1997
+ A12:1999

Note 2.1

Date expired
(01/05/2007)

Note 3

Date expired
(01/05/2012)

Low-voltage switchgear and controlgear — Part 5-2: Control circuit devices and switching elements – Proximity switches
IEC 60947-5-2:2007

EN 60947-5-2:1998
+ A2:2004

Note 2.1

Date expired
(01/11/2010)

Low-voltage switchgear and controlgear — Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDF)
IEC 60947-5-3:1999

Relevant generic standard(s)

Note 2.1

Date expired
(01/05/2002)

Note 3

Date expired
(01/03/2008)

Low-voltage switchgear and controlgear — Part 5-6: Control circuit devices and switching elements – DC interface for proximity sensors and switching amplifiers (NAMUR)
IEC 60947-5-6:1999

EN 50227:1997

Note 2.1

Date expired
(01/01/2003)

Low-voltage switchgear and controlgear — Part 5-7: Control circuit devices and switching elements – Requirements for proximity devices with analogue output
IEC 60947-5-7:2003

Relevant generic standard(s)

Note 2.1

Date expired
(01/09/2006)

Low-voltage switchgear and controlgear — Part 5-9: Control circuit devices and switching elements – Flow rate switches
IEC 60947-5-9:2006

Low-voltage switchgear and controlgear — Part 6-1: Multiple function equipment – Transfer switching equipment
IEC 60947-6-1:2005

EN 60947-6-1:1991
+ A2:1997

Note 2.1

Date expired
(01/10/2008)

Low-voltage switchgear and controlgear — Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS)
IEC 60947-6-2:2002

EN 60947-6-2:1993
+ A1:1997

Note 2.1

Date expired
(01/09/2005)

Note 3

Date expired
(01/03/2010)

Low-voltage switchgear and controlgear — Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
IEC 60947-8:2003

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/2006)

Note 3

Date expired
(01/10/2009)

Arc welding equipment — Part 10: Electromagnetic compatibility (EMC) requirements
IEC 60974-10:2007

EN 60974-10:2003

Note 2.1

Date expired
(01/12/2010)

Electromagnetic compatibility (EMC) — Part 3-2: Limits – Limits for harmonic current emissions (equipment input current <= 16 A per phase)
IEC 61000-3-2:2005

EN 61000-3-2:2000
+ A2:2005

Note 2.1

Date expired
(01/02/2009)

Note 3

Date expired
(01/07/2012)

Note 3

Date expired
(01/07/2012)

Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
IEC 61000-3-3:2008

EN 61000-3-3:1995
+ A1:2001
+ A2:2005

Date expired
(01/09/2011)

Electromagnetic compatibility (EMC) — Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75 A and subject to conditional connection
IEC 61000-3-11:2000

Relevant generic standard(s)

Note 2.3

Date expired
(01/11/2003)

Electromagnetic compatibility (EMC) — Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
IEC 61000-3-12:2004

Relevant generic standard(s)

Note 2.3

Date expired
(01/02/2008)

Electromagnetic compatibility (EMC) — Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
IEC 61000-3-12:2011

EN 61000-3-12:2005

Note 2.1

16/06/2014

Electromagnetic compatibility (EMC) — Part 6-1: Generic standards – Immunity for residential, commercial and light-industrial environments
IEC 61000-6-1:2005

EN 61000-6-1:2001

Note 2.1

Date expired
(01/12/2009)

Electromagnetic compatibility (EMC) — Part 6-2: Generic standards – Immunity for industrial environments
IEC 61000-6-2:2005

EN 61000-6-2:2001

Note 2.1

Date expired
(01/06/2008)

Electromagnetic compatibility (EMC) — Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
IEC 61000-6-3:2006

EN 61000-6-3:2001
+ A11:2004

Date expired
(01/12/2009)

Note 3

12/01/2014

Electromagnetic compatibility (EMC) — Part 6-4: Generic standards – Emission standard for industrial environments
IEC 61000-6-4:2006

EN 61000-6-4:2001

Note 2.1

Date expired
(01/12/2009)

Note 3

12/01/2014

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) — Part 1: General rules
IEC 61008-1:1996 (Modified) + A1:2002 (Modified)

EN 61008-1:1994
+ A2:1995
+ A14:1998

Note 2.1

Date expired
(01/04/2009)

Note 3

Date expired
(01/12/2011)

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO’s) — Part 1: General rules
IEC 61009-1:1996 (Modified) + A1:2002 (Modified)

EN 61009-1:1994
+ A1:1995
+ A14:1998

Note 2.1

Date expired
(01/04/2009)

Note 3

Date expired
(01/12/2011)

Note 3

Date expired
(01/12/2011)

Programmable controllers — Part 2: Equipment requirements and tests
IEC 61131-2:2007

EN 61131-2:2003

Note 2.1

Date expired
(01/08/2010)

Low voltage power supplies, d.c. output — Part 3: Electromagnetic compatibility (EMC)
IEC 61204-3:2000

Relevant generic standard(s)

Note 2.3

Date expired
(01/11/2003)

Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 1: General requirements
IEC 61326-1:2005

EN 61326:1997
+ A1:1998
+ A2:2001
+ A3:2003

Date expired
(01/02/2009)

Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
IEC 61326-2-1:2005

EN 61326:1997
+ A1:1998
+ A2:2001
+ A3:2003

Date expired
(01/02/2009)

Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
IEC 61326-2-2:2005

EN 61326:1997
+ A1:1998
+ A2:2001
+ A3:2003

Date expired
(01/02/2009)

Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
IEC 61326-2-3:2006

EN 61326:1997
+ A1:1998
+ A2:2001
+ A3:2003

Date expired
(01/08/2009)

Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
IEC 61326-2-4:2006

EN 61326:1997
+ A1:1998
+ A2:2001
+ A3:2003

Date expired
(01/11/2009)

Electrical equipment for measurement, control and laboratory use – EMC requirements — Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
IEC 61326-2-5:2006

EN 61326:1997
+ A1:1998
+ A2:2001
+ A3:2003

Date expired
(01/09/2009)

Low-voltage switchgear and controlgear assemblies — Part 1: General rules
IEC 61439-1:2009 (Modified)

EN 60439-1:1999

Note 2.1

01/11/2014

Low-voltage switchgear and controlgear assemblies — Part 1: General rules
IEC 61439-1:2011

EN 61439-1:2009

Note 2.1

23/09/2014

Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies
IEC 61439-2:2009

Low-voltage switchgear and controlgear assemblies — Part 2: Power switchgear and controlgear assemblies
IEC 61439-2:2011

EN 61439-2:2009

Note 2.1

23/09/2014

Low-voltage switchgear and controlgear assemblies — Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
IEC 61439-3:2012

Low-voltage switchgear and controlgear assemblies — Part 5: Assemblies for power distribution in public networks
IEC 61439-5:2010

Residual current-operated protective devices (RCDs) for household and similar use – Electromagnetic compatibility
IEC 61543:1995

Relevant generic standard(s)

Note 2.3

Date expired
(04/07/1998)

Note 3

Date expired
(01/03/2007)

Note 3

Date expired
(01/03/2008)

Note 3

Date expired
(01/12/2008)

Equipment for general lighting purposes – EMC immunity requirements
IEC 61547:1995

Relevant generic standard(s)

Note 2.3

Date expired
(01/07/1996)

Note 3

Date expired
(01/11/2003)

Equipment for general lighting purposes – EMC immunity requirements
IEC 61547:2009

EN 61547:1995
and its amendment

Note 2.1

Date expired
(01/07/2012)

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures — Part 12: Performance measuring and monitoring devices (PMD)
IEC 61557-12:2007

Adjustable speed electrical power drive systems — Part 3: EMC requirements and specific test methods
IEC 61800-3:2004

EN 61800-3:1996
+ A11:2000

Note 2.1

Date expired
(01/10/2007)

Note 3

19/12/2014

Specified time relays for industrial use — Part 1: Requirements and tests
IEC 61812-1:1996

Note 3

Date expired
(01/01/2002)

Time relays for industrial and residential use — Part 1: Requirements and tests
IEC 61812-1:2011

EN 61812-1:1996
and its amendment

Note 2.1

29/06/2014

Electrical accessories – Residual current monitors for household and similar uses (RCMs)
IEC 62020:1998

Note 3

Date expired
(01/03/2008)

Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) — Part 1: General rules
IEC 62026-1:2007

Relevant generic standard(s)

Note 2.1

Date expired
(01/09/2010)

Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) — Part 3: DeviceNet
IEC 62026-3:2008

Relevant generic standard(s)

Note 2.1

Uninterruptible power systems (UPS) — Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62040-2:2005

EN 50091-2:1995

Note 2.1

Date expired
(01/10/2008)

Electricity metering equipment (AC) – General requirements, tests and test conditions — Part 11: Metering equipment
IEC 62052-11:2003

Relevant generic standard(s)

Note 2.3

Date expired
(01/03/2006)

Electricity metering equipment (a.c.) – General requirements, tests and test conditions — Part 21: Tariff and load control equipment
IEC 62052-21:2004

EN 61037:1992
+ A1:1996
+ A2:1998
+ EN 61038:1992
+ A1:1996
+ A2:1998

Note 2.1

Date expired
(01/07/2007)

Electricity metering equipment (a.c.) – Particular requirements — Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
IEC 62053-11:2003

EN 60521:1995

Note 2.1

Date expired
(01/03/2006)

Electricity metering equipment (a.c.) – Particular requirements — Part 21: Static meters for active energy (classes 1 and 2)
IEC 62053-21:2003

EN 61036:1996
+ A1:2000

Note 2.1

Date expired
(01/03/2006)

Electricity metering equipment (a.c.) – Particular requirements — Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
IEC 62053-22:2003

EN 60687:1992

Note 2.1

Date expired
(01/03/2006)

Electricity metering equipment (a.c.) – Particular requirements — Part 23: Static meters for reactive energy (classes 2 and 3)
IEC 62053-23:2003

EN 61268:1996

Note 2.1

Date expired
(01/03/2006)

Electricity metering (a.c.) – Tariff and load control — Part 11: Particular requirements for electronic ripple control receivers
IEC 62054-11:2004

EN 61037:1992
+ A1:1996
+ A2:1998

Note 2.1

Date expired
(01/07/2007)

Electricity metering (a.c.) – Tariff and load control — Part 21: Particular requirements for time switches
IEC 62054-21:2004

EN 61038:1992
+ A1:1996
+ A2:1998

Note 2.1

Date expired
(01/07/2007)

Resistance welding equipment — Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62135-2:2007

EN 50240:2004

Note 2.1

Date expired
(01/02/2011)

Static transfer systems (STS) — Part 2: Electromagnetic compatibility (EMC) requirements
IEC 62310-2:2006 (Modified)

Relevant generic standard(s)

Note 2.1

Date expired
(01/09/2009)

Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B RCBOs)
IEC 62423:2007 (Modified) + IEC

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

EN 300 386 V1.3.3

Note 2.1

Date expired
(31/07/2011)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

EN 300 386 V1.4.1

Note 2.1

31/01/2014

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements

EN 300 386 V1.5.1

Note 2.1

30/11/2015

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements

EN 301 489-1 V1.8.1

Note 2.1

30/06/2013

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones

EN 301 489-34 V1.1.1

Note 2.1

28/02/2014